Edimax AR-7286WnA User Manual download pdf (Page 59)

Field

Description

Auto Discovered, the router accepts the firstly-received

DNS assignment from one of the PPPoA, PPPoE or MER

enabled PVC(s) during the connection establishment. If

select User Discovered, enter the IP addresses of the

primary and secondary DNS servers.

Primary DNS

Server

DNS server FOR wan and LAN

Secondary

DNS Server

DNS server FOR wan and LAN

Radvd Enable

You may choose to enable or disable Radvd. The Router

Advertisement Daemon (Radvd) is an open-source

software product that implements link-local

advertisements of IPv6 router addresses and IPv6

routing prefixes using the Neighbor Discovery Protocol

(NDP).

Radvd Mode

You may choose Auto or Manual.

Auto Prefix

Select Enable or Disable.

RA Flag Set

You may choose ManagedAddr or Other Config.

DHCP6 Server

You may choose to enable or disable DHCP6 Server.

DHCP6 Mode

You may choose Auto or Manual for the DHCP6 Server.

Dynamic Host Configuration Protocol (DHCP) allows the individual PC to

obtain the TCP/IP configuration from the centralized DHCP server. You can

configure this router as a DHCP server or disable it. The DHCP server can

assign IP address, IP default gateway and DNS server to DHCP clients. This

router can also act as a surrogate DHCP server (DHCP proxy) where it relays

IP address assignment from an actual DHCP server to clients. You can enable

or disable DHCP server or DHCP proxy.

In the DHCP field, choose Disabled, the page shown in the following figure

appears.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

No comments

Edimax AR-7286WnA User Manual Page 59