Edimax AR-7286WnA User Manual download pdf (Page 68)

Field

Description

Application

You can enter an application name, or select a name from the

right drop-list menu like FTP or TELNET.

Protocol

Choose the transport layer protocol that the service type. You

can choose ALL, TCP or UDP.

Start/End

Port

Number

Enter the specific start and end port number you want to

forward. If it is only one port, enter the end port number the

same as start port number. For example, if you want to set the

FTP Virtual server, you can set the start and end port number

to 21.

Local IP

Address

Enter the IP Address for the Virtual Server in the LAN.

In the NAT page, select Number of IPs as Multiple, and then choose IP

Address Mapping (for Multiple IP Service), and the page shown in the

following figure appears. The IP Address Mapping rule is per-VC based (only

for Multiple IPs' VCs).

Entries in this table allow you to configure one IP pool for specified source IP

address from LAN, so that one packet whose source IP is in range of the

specified address will select one IP address from the pool for NAT.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

No comments

Edimax AR-7286WnA User Manual Page 68