Edimax AR-7286WnA User Manual download pdf (Page 69)

The following table describes the parameters of this page:

Field

Description

Rule Index

The Virtual server rule index for this VC. You can specify

10 rules in maximum. All the VCs with single IP will use

the same Virtual Server rules.

Rule Type

Choose the One-to-One, Many-to-One, Many-to-Many

Overload, Many-to-Many No Overload, or Server.

Local Start/End

Enter the local IP Address you plan to map to. Local Start

IP is the starting local IP address and Local End IP is the

ending local IP address. If the rule is for all local IPs, then

the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.

Public Start/End

Enter the public IP Address you want to use for NAT.

Public Start IP is the starting public IP address and Public

End IP is the ending public IP address. If you have a

dynamic IP, enter 0.0.0.0 as the Public Start IP.

5.5.4. QoS

The QoS provides better service of selected network traffic over various

technologies. This function can be set based on the physical LAN ports or

wireless interfaces under IPv4 or IPv6 version respectively.

IP Version: IPv4

Choose Advanced Setup > QoS, the page shown in the following figure

appears.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 91 92

No comments

Edimax AR-7286WnA User Manual Page 69