Edimax AR-7286WnA User Manual download pdf (Page 44)

The following table describes the parameters in this page:

Field

Description

VPI

Virtual path identifier (VPI) is the virtual path between two

points in an ATM network. Its valid value is between 0 and

255. Enter the correct VPI provided by your ISP. By default,

VPI is set to 8.

VCI

Virtual channel identifier (VCI) is the virtual channel between

two points in an ATM network. Its valid value is between 1

and 65535. Enter the correct VCI provided by your ISP. By

default, VCI is set to 35.

Connection

Type

You can select LLC or VC-Mux. In this example, the

encapsulation mode is set to 1483 Bridged IP LLC.

5.3.3. Dynamic IP Address

For configuration method, please refer to that of Auto setup by ISP list

Select Auto setup by ISP list, click NEXT, and the page as shown in the

following figure appears.

The following table describes the parameters in this page:

Field

Description

Country

Select the country you are in.

ISP

Select your Internet Service Provider (ISP).

VPI

Virtual path identifier (VPI) is the virtual path between two

points in an ATM network. Its valid value is between 0 and

255. Enter the correct VPI provided by your ISP.

VCI

Virtual channel identifier (VCI) is the virtual channel between

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 91 92

No comments

Edimax AR-7286WnA User Manual Page 44