Edimax PS-1206U User Manual download pdf (Page 73)

8.4.3 TCP/IP

You can configure the print server to automatically get IP

from DHCP server or manually specify static IP. The print

server also has a built-in DHCP server. You can enable this

DHCP server and let it manages IP for you.

If you need the print server to automatically get an IP from

DHCP server, select “Enable Obtain TCP/IP Settings

Automatically (Use DHCP/ BOOTP)”. You also can select

“Disable Use the following TCP/IP Settings” to manually

assign “IP Address”, “Subnet Mask” and “Gateway” for the

print server.

You can enable/disable or set auto for the print server’s

DHCP server. The DHCP server is disabled by default. If

the DHCP Server is enabled or set Auto, you have to

assign a range of IP addresses here. Fill in the “Start IP”,

“Range”, “DNS”, “Subnet Mask” and “Gateway”, and the

print server will assign a unique IP for each client. Note

that when “Auto” is selected, the DHCP Server of the print

server will be enabled only when there is no other DHCP

Server within the network.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 85 86

No comments

Edimax PS-1206U User Manual Page 73