Edimax PS-1206U User Manual download pdf (Page 55)

7.10 Wireless Configuration

If you want to use the print server through wireless LAN, please set up the

print server through Ethernet first and make sure your wireless LAN setting

is correct. After setting the wireless LAN, unplug the Ethernet cable and

restart the print server, then you can start to use the print server through

wireless LAN. If the wireless configuration does not work, please plug the

Ethernet cable again, restart the print server and configure the print server

through Ethernet until the wireless LAN settings are correct.

The default settings of the print server wireless function are

as follows.

y Mode: Ad-Hoc

y SSID: Default

y Channel: 11

Double Click “Wireless” icon and the wireless configuration

window will pop-up.

If you use access point to build up wireless network, you

have to select “Infrastructure Mode”. If you do not have any

access point and want to use peer-to-peer connection to

build up wireless network, you have to select “Ad-Hoc

Mode”.

After selecting the operation modes of the wireless function,

click “Next” to go to further detailed configuration.

Infrastructure Mode:

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

No comments

Edimax PS-1206U User Manual Page 55