Edimax PS-1210MFn User Manual download pdf (Page 8)

3. Getting Started

Before you start, you should have:

 One computer with Windows 2000 SP4 above, Windows XP SP1 above,

Windows Vista (32-bit/64-bit) or Windows 7.

 One MFP or printer with USB port and an installation CD

 One Category 5 Ethernet Cable

 One USB Cable

3.1. Hardware Installation Procedure

1. Unpack the MFP Server package and verify that all the items listed in the

previous section are provided.

2. Plug the USB cable to the MFP Server with the MFP or printer that you

want to share on the network.

3. Connect the MFP Server to your network by attached the network cable to

the network port of the MFP server.

4. Connect the power adapter to the MFP Server. The MFP Server will

perform the Power-On-Self-Test (POST) after it is powered on. When the

Status LED is unlighted, the MFP Server is ready.

Note:

1. You must use the power adapter shipped along with the MFP Server,

do NOT use any other power adapter from other sources.

2. To prevent the compatibility problem between MFP Server and a few

MFP or printer, it is recommended that you power on the MFP Server

before the MFP or printer.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 36 37

No comments

Edimax PS-1210MFn User Manual Page 8