Edimax PS-1210MFn User Manual download pdf (Page 17)

9. Please set the network settings for the MFP Server manually. By default,

the network settings are as follows.

IP Address: 192.168.2.2

Subnet Mask: 255.255.255.0

If you have selected “DHCP”, the MFP Server will try to determine your

network settings automatically. If a DHCP Server is present within the

network, the MFP Server will automatically obtain and configure the

network settings assigned by the DHCP Server. The assigned IP Address

will be shown in the IP Address fields. If no DHCP Server is present within

the network, please assign the network settings of the MFP Server

manually. Please click “Next” once you have found appropriate network

settings for the MFP Server.

Note: The MFP Server IP Address should be in the same network

segment with the connected computer. If the network settings are

incorrect, a message will be prompted to remind you after you click

“Next”. Please make sure that you have set the right settings before

going to the next step. If you don’t want to set it now, please click

“Cancel” to finish the installation. You can then use the “Server

Manager” utility to configure the MFP Server.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

No comments

Edimax PS-1210MFn User Manual Page 17