Edimax 3G-6200N User Manual download pdf (Page 55)

segment

802.1d

Spanning Tree

Disabled

If 802.1d Spanning Tree function is

enabled, this router will use the

spanning tree protocol to prevent

from network loop happened in the

LAN ports.

DHCP Server Enabled

You can enable or disable the DHCP

server. By enabling the DHCP server

the router will automatically give your

LAN clients an IP address. If the

DHCP is not enabled then you’ll have

to manually set your LAN client’s IP

addresses; make sure the LAN Client

is in the same subnet as this

broadband router if you want the

router to be your LAN client’s default

gateway

Lease Time

When enabled, DHCP service will

temporarily give your LAN clients an

IP address. In the Lease Time setting

you can specify the time period that

the DHCP lends an IP address to

your LAN clients. The DHCP will

change your LAN client’s IP address

when this time period is reached

IP Address Pool

You can select a particular IP address

range for your DHCP server to issue

IP addresses to your LAN Clients.

Note: By default the IP range is from:

192.168.2.100 to 192.168.2.200. If

you want your PC to have a

static/fixed IP address then you’ll

have to choose an IP address outside

this IP address Pool.

Domain Name

You can specify a Domain Name for

your LAN.

Click <Apply> at the bottom of the screen to save the configurations.

You can now configure other advance sections or start using the router.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 116 117

Comments to this Manuals

No comments

Edimax 3G-6200N User Manual Page 55

Comments to this Manuals

Related products and manuals for Routers Edimax 3G-6200N