Edimax 3G-6200N User Manual download pdf (Page 48)

2.2 3G/3.5G

3G-6200n provides two types of Internet connection method: wireless

(3G/3.5G) or wired connection. You can access internet via USB 3G/3.5G

modem card, or via wired xDSL / cable modem connection. However, only

one connection method (wireless or wired) can be used at the same time.

Related instructions will be given as follow.

3G-6200n supports most of 3G/3.5G modem cards, just connect the modem

card to the USB port of 3G-6200n and 3G-6200n will recognize it

automatically, no additional setup procedure required. However, some of

modem cards require PIN code or account / password (you have to use

3G-6200n’s web interface to input these information), and some modem cards

requires you to connect the modem card with your PC and install driver / utility

before you connect it with 3G-6200n (all PCs which need to access Internet

by 3G-6200n requires to perform this procedure once). If you still not able to

connect to Internet, please use wired Internet connection to access our

website :http://www.edimax.com/ ,download latest version of firmware and

upgrade 3G-6200n’s firmware. If you still not be able to get connected by your

3G/3.5G modem card, please contact your dealer of purchase and provide the

model name of the 3G/3.5G modem card you have, we’ll try our best to help

you to solve the problem.

Only one Internet connection (wireless / wired) can be used at the same time.

Wireless connection (3G/3.5G) will be selected first, and use wired Internet

connection as backup. Therefore, please DO NOT connect your 3G/3.5G

modem card with 3G-6200n, or your telecomm service provider may charge

you with high communication fee. For example, if you connect 3G/3.5G

modem card with 3G-6200n when you’re using wired Internet connection,

wired connection will be dropped and use 3G/3.5G wireless connection

instead. If 3G/3.5G wireless signal reception is poor and the connection can

not be restored within 60 seconds, 3G-6200n will use wired Internet

connection again, and will not switch back to wireless Internet connection

(This only happens with wired Internet connection is available. If wired

connection is unavailable, 3G-6200n will try to establish 3G/3.5G wireless

connection again and again). If you want to use 3G/3.5G wireless connection

again, you need to remove 3G/3.5G modem card from 3G-6200n and

reconnect it back after 5 seconds.

( A ) Plug and play, no setup procedure required.

Connect the USB 3G/3.5G modem card with 3G-6200n and make sure the

corresponding USB LED indicator of 3G-6200n lights up, then you can use the

web browser to access Internet.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 116 117

No comments

Edimax 3G-6200N User Manual Page 48